DINITROL ML - Brown cavity wax – 1 Litre Shultz Can
Overview
Dinitrol ML - Brown cavity wax for doors, Sills & chassis parts
The oil based brown coloured product is specially designed for applying into closed cavities such as doors, frame members and exterior joints and crevices. DINITROL ML is a penetrating cavity wax ideal for rust-proofing second-hand cars, trucks, buses and other commercial vehicles.
DINITROL ML cavity wax is a highly penetrating, water displacing, rust prevention fluid. It penetrates into the fine cracks forming a protective film once dry. DINITROL ML cavity wax is supplied with an extended nozzle to spray inside doors, door sills, chassis parts etc.
Characteristics:
- Brown
- Extremely Penetrating
- Stops ongoing corrosion
- Water displacing
- Oily, flexible film
- Wet in wet with bitumen vehicle Underbody coating
Applications:
DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles. Application temperature should be between 15 and 30°C.
Method of use:
DINITROL ML is applied by spraying with manual or semi-automatic.DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
- Type of film: oily, greasy
- Density at 23°C: 860 kg/m³
- Viscosity at 23°C, DIN 2: 60 s
- Dry matter content: 46 % by weight
- Flash point: 40°C
- Aromatic content in solvent: < 1 %
- Recommended film thickness wet: 30 μm
- Recommended layer thickness: 10 μm
- Drying time: 1 h
- Low temperature adhesion: < – 40°C
- Effect on car paint: none
- Removability: White Spirit
- Salt spray test: > 96 h
- Penetration 50 μm gap: > 70 mm
Specifications
Characteristics:
- Brown
- Extremely Penetrating
- Stops ongoing corrosion
- Water displacing
- Oily, flexible film
- Wet in wet with bitumen vehicle Underbody coating
Applications:
DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles. Application temperature should be between 15 and 30°C.
Method of use:
DINITROL ML is applied by spraying with manual or semi-automatic.
DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
- Type of film: oily, greasy
- Density at 23°C: 860 kg/m³
- Viscosity at 23°C, DIN 2: 60 s
- Dry matter content: 46 % by weight
- Flash point: 40°C
- Aromatic content in solvent: < 1 %
- Recommended film thickness wet: 30 μm
- Recommended layer thickness: 10 μm
- Drying time: 1 h
- Low temperature adhesion: < – 40°C
- Effect on car paint: none
- Removability: White Spirit
- Salt spray test: > 96 h
- Penetration 50 μm gap: > 70 mm
Reviews
There are no reviews yet.