DINITROL 1000 - Transparent cavity wax – 500ml Aerosol
Overview
Dinitrol 1000 - Transparent Cavity Wax
Protection for closed cavities, doors, Inner wings, sills and inner chassis.
DINITROL 1000 was developed for use in closed cavities, doors and other parts of vehicles, trucks and buses. In particular, the product was developed for use in import facilities, during the manufacture of trucks and buses and for the repairs market.
DINITROL 1000 was also developed for use with spare parts, etc. that are stored for long periods of time or transported under very difficult corrosive conditions.
Characteristics:
- Transparent
- High penetration
- Polyethyelene wax base
- Highly water repellent
- Excellent low temperature properties
- Re-wash resistant
Method of use:
DINITROL 1000 is applied by spraying with manual or semi-automatic application equipment, and is suitable for either air-mix or airless spraying. Application temperature should be between 15 and 30°C.
- Colour: Opal to beige transparent
- Type of film: Waxy
- Density at 23°C: 830 kg/m³
- Viscosity at 23°C, DIN 4: 18 s
- Dry matter content: 50% by weight
- Flash point: 40°C
- Aromatic content in solvent: < 1%
- Rec film thickness: 40 μm
- Drying time: 2 h
- Low temperature adhesion: – 40°C
- Effect on car paint None
- Removability: White Spirit
- Heat resistance: > 90°C
- Salt spray test: 500 h
- Penetration 50 µm gap: > 30 mm
Specifications
Characteristics:
- Transparent
- High penetration
- Polyethyelene wax base
- Highly water repellent
- Excellent low temperature properties
- Re-wash resistant
Applications:
DINITROL 1000 is designed for application in closed cavities, doors and other parts of cars, trucks and buses. The product is particularly suitable for use at import plants, during truck and bus manufacture and in the aftermarket. DINITROL 1000 is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions.
Method of use:
DINITROL 1000 is applied by spraying with manual or semi-automatic application equipment, and is suitable for either air-mix or airless spraying. Application temperature should be between 15 and 30°C.
- Colour: Opal to beige transparent
- Type of film: Waxy
- Density at 23°C: 830 kg/m³
- Viscosity at 23°C, DIN 4: 18 s
- Dry matter content: 50% by weight
- Flash point: 40°C
- Aromatic content in solvent: < 1%
- Rec film thickness: 40 μm
- Drying time: 2 h
- Low temperature adhesion: – 40°C
- Effect on car paint None
- Removability: White Spirit
- Heat resistance: > 90°C
- Salt spray test: 500 h
- Penetration 50 µm gap: > 30 mm
Reviews
There are no reviews yet.