DINITROL 3125HS - Dark Brown cavity wax – 500ml Aerosol
.jpg?v=a8177bf5 "Click image for larger view")
3125_Black_500ml_GB
Overview
Dinitrol 3215 HS - Dark Brown Cavity Wax & Light Underbody Chassis Coating
The non dripping solvent based dark brown cavity wax and light underbody wax is specially formulated, with a high dry matter content and is also ideal for open surfaces. DINITROL 3125 HS is designed for application mainly as a cavity protection and a thin underbody coating.
DINITROL 3125 HS does not crack, burst or flake and is suitable for the use of surfaces inside and outside for vehicles, trucks and buses. The product is particularly suitable for use on old vehicles, where corrosion on the subfloor is visible.
Characteristics:
- Dark brown
- High Solids
- Tack-free
- Long term – permanent
- Low temperature resistant
- Drip resistant
- Cavity wax protection
Applications:
- High dry matter content
- Good film building properties
- No dripping
- Type of film: waxy
- Specific Gravity: 980 kg/m³
- Non-volatile content: 68%
- Viscosity (DIN 4): 55 seconds
- Flash point: 41°C
- Recommended film thickness wet: 80 µm
- Recommended layer thickness: 30 µm
- Drying time: 2 hrs
- Low temperature adhesion: – 30°C
- Effect on car paint: None
- Removability: Hydrocarbon solvents
- Heat resistance: > 120°C at 50 µm
Method of use:
DINITROL 3125 HS may be applied by spraying with manual, semi or fully automatic equipment and is suitable for airless spraying on to a clean dry surface.
Specifications
Characteristics:
- Dark brown
- High Solids
- Tack-free
- Long term – permanent
- Low temperature resistant
- Drip resistant
- Cavity wax protection
Applications:
DINITROL 3125 HS is a solvent borne rust preventative specially formulated, with a high dry matter content, to minimise environmental pollution and occupational exposure during on-line application. Main properties are as follows:
- High dry matter content
- Good film building properties
- No dripping
DINITROL 3125 HS is designed for application mainly as a cavity protection and a thin underbody coating. Main objects to be treated are used vehicles with some corrosion present. For improved performance on more corroded surfaces, DINITROL ML can be used as a pre-treatment. The slightly thixotropic nature of the product ensures an evenly applied film to the required thickness and strength.
- Type of film: waxy
- Specific Gravity: 980 kg/m³
- Non-volatile content: 68%
- Viscosity (DIN 4): 55 seconds
- Flash point: 41°C
- Recommended film thickness wet: 80 µm
- Recommended layer thickness: 30 µm
- Drying time: 2 hrs
- Low temperature adhesion: – 30°C
- Effect on car paint: None
- Removability: Hydrocarbon solvents
- Heat resistance: > 120°C at 50 µm
Method of use:
DINITROL 3125 HS may be applied by spraying with manual, semi or fully automatic equipment and is suitable for airless spraying on to a clean dry surface.
Reviews
There are no reviews yet.